Description
- Capable of withstanding very high rpm at high loads
- Suitable for CNC and other high speed turning centers.
- Bearing used are of GERMAN / JAPANESE make.
- Bearing lubricated for life using KLUBER GERMANY make ISOFLEX NBU-15 Grease.
- For higher speeds than specified special centers can be supplied against request.
| Part No. | Shank Taper | Point Style | Ød1 mm | Ød mm | ØD mm | ØD1 mm | L1 mm | L2 mm | L3 mm | L mm | Max. Job Wt. Kg. | Conc. Error mm | Max. RPM |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HSC MT2 CNC HDR P | MT-2 | Profiled Point | 8 | 20 | 46 | 17.780 | 35.0 | 50.5 | 16 | 64.0 | 80 | 0.008 | 6300 |
| HSC MT3 CNC HDR P | MT-3 | Profiled Point | 10 | 28 | 62 | 23.825 | 47.0 | 64.5 | 20 | 81.0 | 240 | 0.008 | 4500 |
| HSC MT4 CNC HDR P | MT-4 | Profiled Point | 12 | 32 | 68 | 31.267 | 53.0 | 65.0 | 26 | 102.5 | 300 | 0.008 | 3450 |
| HSC MT5 CNC HDR P | MT-5 | Profiled Point | 14 | 38 | 87 | 44.399 | 65.0 | 83.0 | 30 | 129.5 | 725 | 0.008 | 2700 |
Load Diagram
Service life of Roller bearing is 2000 Operating Hours
Spare Point of CNC HD R Model Profiled
Wedge to remove Revolving Center from Tailstock
