Description
- Capable of withstanding very high rpm at high loads
- Suitable for CNC and other high speed turning centers.
- Bearing used are of GERMAN / JAPANESE make.
- Bearing lubricated for life using KLUBER GERMANY make ISOFLEX NBU-15 Grease.
- For higher speeds than specified special centers can be supplied against request.
| Part No. | Shank Taper | Point Style | Ød2 C.T. mm | Ød mm | ØD mm | ØD1 mm | L1 mm | L2 mm | L mm | Max. Job Wt. Kg. | Conc. Error mm | Max. RPM |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HSC MT3 CNC HDR S CT | MT-3 | Stub C. T. Point | 14 | 28 | 62 | 23.825 | 34.0 | 64.5 | 81.0 | 375 | 0.008 | 4500 |
| HSC MT4 CNC HDR S CT | MT-4 | Stub C. T. Point | 14 | 32 | 68 | 31.267 | 41.0 | 65.0 | 102.5 | 600 | 0.008 | 3450 |
| HSC MT5 CNC HDR S CT | MT-5 | Stub C. T. Point | 18 | 38 | 87 | 44.399 | 51.0 | 83.0 | 129.5 | 1500 | 0.008 | 2700 |
| HSC MT6 CNC HDR S CT | MT-6 | Stub C. T. Point | 18 | 50 | 102 | 63.348 | 57.5 | 101.5 | 182 | 2600 | 0.0015 | 2300 |
Load Diagram
Service life of Roller bearing is 2000 Operating Hours
Spare Point of CNC HD R Stub with Carbide Tip
Wedge to remove Revolving Center from Tailstock
