Description
- Application: In turning of pipes and tubes which cannot be held by ordinary Live Centers because of small point diameters of live centers.
- Not suitable for CNC turning applications.
- 60 Degree angle Revolving Cone (Not Dead).
- Dead Pipe Centers for grinding application (recommended) made against order.
- Bearings protected from coolant & dirt / chips by oil seal.
| Part No. | Shank Taper | ØD mm | ØD1 mm | L mm | L1 mm | Conc. Error mm | Max. RPM |
|---|---|---|---|---|---|---|---|
| PC MT2 0-2” | MT-2 | 55 | 17.780 | 64.0 | 88.0 | 0.015 | 750 |
| PC MT2 0-2½” | MT-2 | 65 | 17.780 | 64.0 | 91.0 | 0.015 | 750 |
| PC MT2 0-3” | MT-2 | 77 | 17.780 | 64.0 | 102.0 | 0.015 | 600 |
| PC MT3 0-2” | MT-3 | 55 | 23.825 | 81.0 | 88.0 | 0.015 | 750 |
| PC MT3 0-2½” | MT-3 | 65 | 23.825 | 81.0 | 91.0 | 0.015 | 750 |
| PC MT3 0-3” | MT-3 | 77 | 23.825 | 81.0 | 102.0 | 0.015 | 600 |
| PC MT3 0-3½” | MT-3 | 90 | 23.825 | 81.0 | 115.0 | 0.015 | 600 |
| PC MT3 0-4” | MT-3 | 102 | 23.825 | 81.0 | 115.0 | 0.015 | 500 |
| PC MT3 0-5” | MT-3 | 127 | 23.825 | 81.0 | 163.5 | 0.015 | 350 |
| PC MT4 0-2” | MT-4 | 55 | 31.267 | 102.5 | 90.5 | 0.015 | 750 |
| PC MT4 0-2½” | MT-4 | 65 | 31.267 | 102.5 | 93.5 | 0.015 | 750 |
| PC MT4 0-3” | MT-4 | 77 | 31.267 | 102.5 | 103.5 | 0.015 | 600 |
| PC MT4 0-3½” | MT-4 | 90 | 31.267 | 102.5 | 116.5 | 0.015 | 600 |
| PC MT4 0-4” | MT-4 | 102 | 31.267 | 102.5 | 116.5 | 0.015 | 500 |
| PC MT4 0-5” | MT-4 | 127 | 31.267 | 102.5 | 158.0 | 0.015 | 350 |
| PC MT5 0-2” | MT-5 | 55 | 44.399 | 129.5 | 90.5 | 0.015 | 750 |
| PC MT5 0-2½” | MT-5 | 65 | 44.399 | 129.5 | 93.5 | 0.015 | 750 |
| PC MT5 0-3” | MT-5 | 77 | 44.399 | 129.5 | 104.5 | 0.015 | 600 |
| PC MT5 0-3½” | MT-5 | 90 | 44.399 | 129.5 | 117.5 | 0.015 | 600 |
| PC MT5 0-4” | MT-5 | 102 | 44.399 | 129.5 | 117.5 | 0.015 | 500 |
| PC MT5 0-5” | MT-5 | 127 | 44.399 | 129.5 | 159.0 | 0.015 | 350 |
| PC MT6 0-4” | MT-6 | 102 | 63.348 | 182.0 | 130.0 | 0.015 | 500 |
| PC MT6 0-5” | MT-6 | 127 | 63.348 | 182.0 | 161.0 | 0.015 | 350 |